Updated News Around the World

Acquiring CSI in RIS-assisted mobile communication systems

Acquiring CSI in RIS-assisted mobile communication systems
(a) Units in a passive RIS only have the reflection mode and cannot amplify the incident wave. (b) A selection-type hybrid RIS has a few active sensors. A switch is needed to make selection between an RF chain and its possibly connected active sensor. (c) For a beamforming-type hybrid RIS, analog beamforming is performed before signals received by the active sensors being combined at the RF chains. (d) Units in an active RIS have the reflection mode and signal amplification capability. Art by Yu Han. Credit: Science China Press

Mobile communication builds an invisible bridge between two users at geographically distant locations. To meet the growing communication demands of the users, widening the bridge is a direct and effective approach. By increasing antennas at transmitter and receiver sides, multiple parallel spatial channels can be formed, bringing to the multiplication of the bridge width. However, the continuous increase in the number of antennas inevitably leads to a surge in costs and power consumption.

To ensure effective utilization of the spatial resources, 6G introduces reconfigurable intelligent surfaces (RISs) into mobile communication systems. A RIS is composed of numerous subwavelength units, forming an extra large-scale array. By adjusting the electromagnetic response of each unit, flexible control over incident electromagnetic waves can be achieved. This, in turn, enables the widening of the invisible bridge in a cost-effective and energy-efficient manner.

It is worth mentioning that the invisible bridge in mobile communication systems, which is the wireless channel, is not constant but dynamically varies with the movement of the user device and the change of the surrounding environment. To optimize the transmission scheme, it is necessary to proactively detect this invisible bridge in real-time and design data transmission schemes that are more suitable for the bridge based on precise wireless channel state information (CSI) that is obtained by the system.

Initially, the RISs used in mobile communication systems only had signal reflection capabilities, and thus were unable to receive or process signals. This posed significant challenges in acquiring CSI in the transmitter-RIS-receiver link.

To overcome this obstacle, researchers and industry professionals have explored various approaches, such as enhancing the configuration of RISs and optimizing methods for CSI acquisition. As of now, a considerable amount of research achievements have been accumulated regarding how to acquire CSI in RIS-assisted mobile communication systems.

In a new article published in the National Science Review, the research team led by Professor Shi Jin from Southeast University and Professor Michail Matthaiou from Queen’s University Belfast provided an overview of the acquisition of CSI in RIS-assisted mobile communication systems.

The article discusses the various categories of RISs currently used in mobile communication systems and analyzes the advantages and limitations of CSI acquisition for each category. It further categorizes CSI into implicit and explicit types and provides a comprehensive summary and comparison of CSI acquisition methods for these two types, considering factors such as applicable RIS categories, estimation objectives, estimation algorithms, and training overhead.

The article also discusses the challenges that need to be addressed in the future for CSI acquisition in RIS-assisted mobile communication systems, considering the new architecture and applications in 6G.

More information:
Yu Han et al, CSI acquisition in RIS-assisted mobile communication systems, National Science Review (2023). DOI: 10.1093/nsr/nwad127

Provided by
Science China Press


Citation:
Acquiring CSI in RIS-assisted mobile communication systems (2023, July 25)
retrieved 25 July 2023
from https://techxplore.com/news/2023-07-csi-ris-assisted-mobile-communication.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! NewsUpdate is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.