Realme GT 2 Pro front design officially teased, will feature slim bezels, punch-hole display | 91mobiles.com

Realme GT 2 Pro front design is out

As seen in the picture above, the Realme GT 2 Pro will feature a flat AMOLED panel with a left-aligned punch-hole cutout for the selfie camera. The chin and the forehead of the device appear to be in symmetry and we can expect the Realme GT 2 Pro to feature tiny bezels. The power button is on the right side of the device, while the volume up and down buttons are on the left side. At the bottom of the Realme GT 2 Pro, there’s a USB Type-C charging port, a bottom-firing speaker, a primary microphone, and the SIM tray. We could not find a 3.5mm headphone jack at the bottom of the device and unless it’s located at the top (which is unlikely, by the way), the Realme GT 2 Pro appears to have ditched the jack.

Realme GT 2 Pro expected specifications

Courtesy of the TENAA listing the device was spotted on a little while ago, we have a working clue as to what specifications the Realme GT 2 Pro will come packed with. The device will sport a 6.7-inch QHD+ AMOLED display with a resolution of 1,440 x 3,216 pixels and a 120Hz refresh rate.

Powering the Realme GT 2 Pro will be a Snapdragon 8 Gen 1 chipset, which will be coupled with 8GB/12GB of RAM and 128GB/256GB/512GB of onboard memory variants.

At the back, the Realme GT 2 Pro will feature a triple rear camera setup – 50MP + 50MP + 2MP and at the front, the device will have a 32MP selfie shooter. Coming to the battery life, the Realme GT 2 Pro will sport a 5,000mAh battery with support for 65W fast charging. To learn more about the Realme GT 2 Pro TENAA listing and its specifications, you can head to our previous coverage for the same.