Updated News Around the World

Team creates anode-free Na batteries with high energy densities and long cycle lifetimes

Team creates anode-free Na batteries with high energy densities and long cycle lifetimes
Graphic showing how the Sodium batteries developed by the researchers work. The batteries with cooperative interfaces use a graphitic carbon coating as the current collector and BPG as the electrolyte. Credit: Li et al

In recent years, engineers worldwide have been trying to devise new battery and energy storage technologies that are more sustainable and cost-effective. One of the solutions attracting particular interest is sodium-based battery technology.

Sodium-ion batteries could have numerous advantages over conventional and widely used lithium-based batteries. Most notably, as sodium is abundant on our planet and can be easily sourced, they could be affordable and easy to produce on a large-scale.

Despite their possible advantages, most sodium-ion batteries developed so far exhibited low energy densities, due to the relatively large atomic size of sodium and its considerable weight. Typically, these batteries exhibit energy densities below 160 Wh kg-1, which is significantly lower than that of lithium-ion batteries.

Researchers at the Chinese Academy of Sciences, HiNa Battery Technology Co., the Yangtze River Delta Physics Research Center, and the Tianmu Lake Institute of Advanced Energy Storage Technologies have recently introduced a design strategy to achieve sodium-ion batteries with higher energy densities. Their approach, introduced in a paper published in Nature Energy, entails the introduction of a graphitic carbon coating inside the batteries, specifically on the aluminum current collector.

“We report an initial anode-free Na battery with an energy density of over 200 Wh kg-1, which is even higher than that of the commercial LiFePO4||graphite battery,” the researchers wrote in their paper. “Through introducing graphitic carbon coating on the Al current collector and boron-containing electrolytes in the battery, we show that uniform nucleation and robust interphases enable reversible and crack-free Na deposition.”

The researchers used their design strategy to fabricate anode-free sodium batteries. These batteries were fabricated using an interfacial engineering method, and each included a boron-based electrolyte, a graphite current collector and a layered oxide cathode.

They then evaluated their batteries in a series of tests and found that they had remarkable energy densities when compared to other sodium-based battery technology. In addition, their batteries had a long cycle lifetime, which suggest that they could reliably operate for long periods of time.

“Benefitting from the synergetic effects derived from the built cooperative interfaces, the cycling lifetime of the Na battery without applying additional pressure reaches 260 cycles, which is the longest life for large-size cells with zero excess Na,” the researchers added in their paper. “The insights gained from the Na plating/stripping behavior and interfacial chemistry in this work pave the way for further development of Na batteries with even higher performance.”

The initial results gathered by this team of researchers highlight the promise of their design for creating sodium-based batteries that could be introduced on a large-scale in real-world settings. In the future, their paper could inspire other teams to test similar design strategies, ultimately paving the way towards the fabrication of new and implementable sodium-ion battery solutions.


Researchers develop alternative to lithium batteries


More information:
Yuqi Li et al, Interfacial engineering to achieve an energy density of over 200 Wh kg−1 in sodium batteries, Nature Energy (2022). DOI: 10.1038/s41560-022-01033-6

© 2022 Science X Network

Citation:
Team creates anode-free Na batteries with high energy densities and long cycle lifetimes (2022, June 29)
retrieved 29 June 2022
from https://techxplore.com/news/2022-06-team-anode-free-na-batteries-high.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! NewsUpdate is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.